Direct-to-film printing
Build a gang sheet for free, or bring one that is already print-ready. Either way, keep the roll width at 17 inches or less and check the file rules before uploading.
Choose your path
Build your gang sheet right here. Download the finished PNG or ZIP, then continue to the Project Starter to upload your file and send Mike your order details.
Already finished building?
I finished my gang sheet — continue in the Project Starter →Build your sheet
Upload transparent PNGs, arrange your designs, and download the finished sheet. Then upload the PNG or ZIP in the Project Starter to request your quote.
Finished your gang sheet?
Upload your finished sheet & start your order →If the builder does not load, open the standalone builder and upload your finished file in the Project Starter.
Before you download
These same requirements are repeated inside the DTF Project Starter so customers can check their files again before moving forward.
The sheet can be any width up to 17 inches, and each page must be no longer than 180 inches. For long jobs, declare each PNG page’s dimensions and copies, including pages inside a ZIP. Billing uses the full 17-inch roll width even for narrower art.
Upload transparent PNG artwork. Remove every unwanted background before arranging the designs on the sheet.
300 DPI or higher is ideal. 280–299 DPI is acceptable. Anything below 280 DPI is not recommended for print.
Use about 0.125–0.25 inch between designs. Use trim and rotation when helpful, then review the full sheet before downloading.
Order options
Use the builder if you need to arrange artwork. When the file is ready, upload it in the Project Starter to send the order details to Mike.
Open the Project Starter